- Five pieces of 13"x14"x1/4"adhesive-backed polyethylene to insulate the inside of the RAB70 or RAB77A4 wall case
- Minimizes the formation of moisture on exterior of wall case
- Permits most existing architectural louvered grilles to be used with sloped front or rounded front"J"Chassis units
- Contains two wire mesh screen sections, clips to attach screen to existing wall case and two air deflectors
- Adapts built-in wall case for window installation
- Included in"J"series units designed for window installation
- Window opening width 26-7/8"to 40"; window opening height 16-3/8"minimum
- Required for 5200 series 265/277 volt units
- Branch circuit plug to be used only in connection to appropriate sub-base
- 265/277 volts
- 3,450 heater wattage
- 230/208 Volts
- 5,000/4,090 heater wattage
- 30 Amps
- 230/208 Volts
- 5,000/4,090 heater wattage
- 30 Amps
- 230/208 Volts
- 3,450/2,820 heater wattage
- 20 Amps
- 230/208 Volts
- 3,450/2,820 heater wattage
- 20 Amps
- 230/208 Volts
- 2,550/2,090 heater wattage
- 15 Amps
- 230/208 Volts
- 2,550/2,090 heater wattage
- 15 Amps
- Made of heavy gauge steel to provide support of the wall case
- Full base enclosure with break-away side channels
- Simple connection to wall case
- 4-point leveling legs
- Made of heavy gauge steel to provide support of the wall case
- Full base enclosure with break-away side channels
- Simple connection to wall case
- 4-point leveling legs
- 24 V AC digital remote wall thermostat with Single Stage Cooling and 2-Stage Heating for resistance heat models
- Requires 6-wire hook-up
- AZ3200 and 5200 series require optional RAKOIM
- Adapts Fedders"A"wall case for installtion of the"J"wall case and"J"model chassis
- Existing Fedders wall case dimensions are 27"W, 16-3/4"H, 16-3/4"D
- Consists of four gaskets which are applied to the wall case to assure a tight weather seal between the two cases
- Adapts RAB30 wall case for installation of the sloped front or rounded front"J"model chassis
- RAB30 case dimensions are 16"W, 18"H, 24"D
- Adapts Whirlpool Type 23W wall case for installation of the sloped front or rounded front"J"model chassis
- Whirlpool case dimensions are 25-7/8"W 16-1/2"H, 23-1/8"D
- Adapts Hotpoint ACXB10 and ACXB11 wall case (used with ACTB chassis) to the sloped front or rounded front"J"chassis
- Existing case dimensions are 25-3/4"W, 16-7/8"H, 18-5/8"D
- Extruded aluminum outdoor grille for use with RAB71, RAB77 and extended wall cases
- Grilles are paintable to match building decor
- Optional, one-piece molded grille and frame assembly for improved appearance and protection
- Molded of GE Cycoloy® with a slightly textured, colorfast surface to blend with most walls
- Optional, one-piece molded grille and frame assembly for improved appearance and protection
- Molded of GE Cycoloy® with a slightly textured, colorfast surface to blend with most walls
- Optional, one-piece molded grille and frame assembly for improved appearance and protection
- Molded of GE Cycoloy® with a slightly textured, colorfast surface to blend with most walls
- Made of durable aluminum to protect chassis components and minimize air recirculation
- Extruded aluminum grille for aplication with RAB46, 47 or 48
- NOT compatible with the RAD4A1 EXTERNAL drain tube; use of this grille would require the use of the INTERNAL TUBE configuration to drain the unit
- Used to Replace Exterior Grille on Old"J"Wall Case
- Grille Included on New RAB46/47/48 Wall Cases
- Genuine GE Part
- One Year Warranty
- Replacement Room Front for"J"series chassis with oval control knob opening
- Not for use on High Mount models
